Reduces your energy bill by 10–20%*
Destroys all foul musty odors
Extends the life of your units

roof_temp_img
surface_temp_img

Waffle House operates 24-7, giving their (4) 5-ton A/C units a constant workout. After they cleaned and coated all condenser and evaporator coils, these older units produced dramatically colder air. Run times were reduced by over 50%, slashing energy use while also improving air quality.

Air temperatures measured during the cleaning and coating process

temp-diff-img
  • Preserves
  • Prolongs
  • Protects
Coats the entire unit including cabinet interior and exterior, fan blades, condensing, evaporator and heat exchange coils
  • Prevents salt damage
  • Lowers your energy bill
  • Add years to the life of
    your A/C units

*Savings will vary based on geographical location and temperatures. The hotter the temperature the more the savings.

Extend life of unit
Significantly improves air flow
Coating conducts energy and transfers heat
Stops cabinet paint fading and dog urine damage
Prevents airborne salt corrosion
service-img
Coating the evaporator creates a permanent, safe high pH that is hostile to viruses and bacteria including Legionella
Water-based | Zero VOC | No odor
Easy in-field application
Units stay cleaner longer
Read More Application & Mixing Guide How SIMIX Pure Air Coating works A/C Commercial A/C Residential

SIMIX Multi-Surface Ceramic Clearcoat makes it easier for the unit to produce colder air

What is SIMIX Multi-Surface Ceramic Clearcoat?

SIMIX Multi-Surface Ceramic Clearcoat is a non film-forming, super-hard liquid glass that will never yellow, chip, peel or crack. Just like in glass, the primary ingredient in SIMIX is silica (sand). That is mixed with potassium and lithium, which are very conductive. SIMIX Multi-Surface Ceramic Clearcoat conducts heat. It is not an insulator, like all other coil coating products on the market today

Why do you need SIMIX Multi-Surface Ceramic Clearcoat?

​Air conditioners start losing efficiency the moment you install them. Tiny gaps are created by the expansion and contraction of the tubes and fins. Airborne corrosive particles and salt ions enter those microscopic gaps, corroding the unit and making it less efficient. SIMIX Multi-Surface Ceramic Clearcoat fills in those microscopic gaps, leaving behind a smoother surface that improves heat transfer

How does SIMIX Multi-Surface Ceramic Clearcoat work?

A/C Ceramic Coating work 1

SIMIX Multi-Surface Ceramic Clearcoat fills in microscopic gaps caused by pollution and salt air, leaving a smoother surface that transfers heat more efficiently.

A/C Ceramic Coating work 2

SIMIX Multi-Surface Ceramic Clearcoat is a conductor. It conducts heat away from the coils.

A/C Ceramic Coating work 3

SIMIX Multi-Surface Ceramic Clearcoat allows the fan to pull more air through the coils and the condenser, cleaning the air with a high pH coating.

Coming Soon!

SIMIX LABEL TRANSITION FOR ALL CERAMIC COATINGS

As SIMIX ceramic coatings were introduced through the years, each coating was labeled specific to its surface description. It has always been the same coating with varying dilution rates done in the field with distilled water

  • - High Shine Ceramic Floor Coating SMX-7700-01
  • - A/C Ceramic Coating SMX-3450-01
  • - Exterior Ceramic Coating SMX-5500-01

While we complete our label transition to one common label for all ceramic coatings you will be receiving the High Shine Ceramic Floor Coating (SMX-7700-01).

Click here for dilution rates

SIMIX Multi-Surface Ceramic Clearcoat Brings Back Fresh Air

Remember that great fresh air smell?
Now you can breathe it again,
thanks to SIMIX Multi-Surface Ceramic Clearcoat.

Clean and coat your evaporator coil to destroy odors and generate clean fresh air. SIMIX dramatically improves air quality when airflow comes in contact with the high pH coating.

Case Study

proof-img

LAKE HAVASU CITY, ARIZONA (Nov. 13, 2020) - SIMIX Multi-Surface Ceramic Clearcoat helps Air Supply Heat Pumps run more efficiently and save energy.
We coated three residential units in Lake Havasu City, Arizona:

  • The three-year-old unit showed a 25.3 degree F improvement
  • The 12-year-old unit had a 23.4 degree F improvement
  • The six-year-old unit had a 26.3 degree F improvement

proof-img

LAKE HAVASU CITY, ARIZONA (November 13, 2020) - SIMIX Multi-Surface Ceramic Clearcoat improved the supply air temperatures by 17 to 20 degrees on six 5-ton units on a convenience store in Arizona.

The units were tested before cleaning and coating, and showed an average supply of 52 degrees.

proof-img

MANILA, PHILIPPINES (July 27, 2018) - SIMIX makes it easy to save thousands of dollars per year on air conditioning.

Our partners in the Philippines used SIMIX Multi-Surface Ceramic Clearcoat on one conditioner, then compared it to another unit that was the same make and model, installed in the same year, doing the same work.

proof-img

Tony Hopcraft and his wife Lynda live in St. Augustine, Florida. The high temperatures regularly top 90 degrees for months.

They cleaned and coated their air conditioner with SIMIX in April 2020. Since then, they’ve been saving money on their energy bill.

proof-img

After cleaning with SIMIX Cleaner and coating with SIMIX Multi-Surface Ceramic Clearcoat, the older unit pictured here produced colder air. The run time was reduced by over 50%, which lowered energy consumption and extended the life of the unit. Before this air conditioner unit was cleaned with SIMIX, the split was 13.3°. After the unit was cleaned with SIMIX, the split was 20.4°. After this air conditioner was coated with SIMIX Multi-Surface Ceramic Clearcoat, the split shot up to 45.3°.

proof-img

SIMIX Multi-Surface Ceramic Clearcoat and SIMIX Cleaner were used on the air conditioner units at a busy diner in suburban Chicago. Tests conducted by AirAnswers show that SIMIX improved the air quality.

SIMIX is Easy to Apply. Click here