Quick Reference Guide for using Simix Multi-Surface Cleaner
It's easy to use Simix Multi-Surface Cleaner.
Simix can be used on all kinds of surfaces, from VCT tile to marble flooring to sinks and laundry. This page explains how to use Simix, how much to use, and how to clean with it.
How to Clean Floors
Simix Multi-Surface Cleaner can be used on carpeting, VCT, hard tile and grout, terrazzo, polished concrete, finished wood, and marble.
HOW MUCH TO USE IN A MOP BUCKET
Lightly soiled: 1 small scoop per gallon of water
Moderate to heavy: 2 small scoops per gallon of water
Very soiled/greasy: 4 small scoops per gallon of water
HOW MUCH TO USE IN AUTOSCRUBBER:
Normal daily cleaning: 1 large scoop per 16-20 gallons water
Extremely soiled: 2 large scoops per 16-20 gallons of water
HOW MUCH TO USE IN TRIGGER SPRAYER
Normal daily cleaning: 1 small scoop in trigger sprayer
Extremely soiled: 2 small scoops in trigger sprayer
HOW MUCH TO USE IN CARPET CLEANING
Moderately soiled: 1 small scoop per gallon of water
Heavily soiled: 2 small scoops per gallon of water
Extremely soiled: 4 small scoops per gallon of water
How to Use in Laundry
Simix Multi-Surface Cleaner is great for laundry. Simix can be used to clean anything, from delicate baby clothes to smelly gym socks to greasy work overalls.
HOW MUCH TO USE IN LAUNDRY:
Standard machine: 1 small scoop per load
Standard machine, heavily soiled: 2 small scoops per load
Standard machine, mold and odors: 4 small scoops per load
Commercial machine (140 degrees/60 lbs): 3 small scoops per load
Commercial machine (140 degrees/60 lbs), heavily soiled: 6 small scoops per load
Simix Multi-Surface Cleaner
Simix Multi-Surface Cleaner is easy to use and can be used on just about anything.
Simix removes bacteria, viruses, algae, mold, dirt and blood and removes odors including pet, urine, smoke and food.
FREE SHIPPING IN CONTINENTAL UNITED STATES. ALL OTHERS EMAIL US FOR RATES.
How to Use Simix to Powerwash Rooftops, Decks, Pavers and Patios
Simix makes cleaning exterior surfaces a breeze. You just dissolve Simix Multi-Surface Cleaner in your power washing rig, spray on, and rinse off.
WHERE TO USE: Concrete driveways/walkways/patios, pavers, brick & mortar, stucco, all roof surfaces, vinyl siding, A/C coils & cabinets, wood joists, unpainted wood fencing/decks/docks.
HOW MUCH TO USE ON SINGLE PLY WHITE ROOF TOPS/COMMERCIAL FLAT ROOF/PITCHED ROOF
Moderately soiled: 1/2 large scoop per gallon of water
Heavily soiled: 1 large scoop per gallon of water
HOW MUCH TO USE ON WALLS, PATIOS, PAVERS & DRIVEWAYS:
1 large scoop per 4 gallons of water
HOW TO USE:
Dissolve Simix Multi-Surface Cleaner in hot water.
Spray on to surface using powerwashing rig.
Rinse with clear hot water.
How to Use Simix to Clean by "Spraying and Walking Away" Method
One pouch of SIMIX Multi-Surface Cleaner treats 4,500 square feet of barrel tile and 4,500 to 7,500 square feet of asphalt shingles.
HOW MUCH TO USE:
1 large scoop per gallon of water.
HOW TO USE:
1. Blow all dirt and debris from roof.
2. Mix Simix Multi-Surface Cleaner in hot water. Shake well or recirculate large tank every 30 minutes.
3. Immediately apply Simix Multi-Surface Cleaner to surface. Get surface thoroughly wet without running.
Overspray is not harmful to pets.
If needed, second application should be applied 60–90 days later. For heavily stained roofs, a third application may be applied after 6 months. For continued maintenance in coastal or humid areas or when mold stains become visible, repeat application. Once roof is clean, reapply once a year to keep it clean.
NOTE: Result times will vary depending on time of year, amount of direct sunlight, humidity and density of stain.